Alfa Romeo Giulias & Stelvios dont have the option to deactivate the traction control. By retrofitting the RDNA Switch from the Quadrifoglio Model, we can program the BCM to accept the race mode which deactivates the traction control.

If you purchase a ECU tune on 93 octane or E50 and better, your first three gears will constantly fighting traction and if you dont have the ability to turn it off, you will leave a lot of power and acceleration on the table.

ALFA Romeos build 2021 and up don not require the RDNA Switch in most cases and the RACE Mode can be enabled through our remote programming services by purchasing the necessary hardware below.

FEATURES:

• Genuine Alfa Romeo Factory RDNA switch
• Allows 2.0L owners to activate “RACE Mode” in the BCM. Optionally remote programming available.

INSTALLATION INSTRUCTIONS: HERE (3rd party Via Giulia Forums)

If you select our remote programming service please purchase following items:

OBD Cable for Multiecuscan: vLinker FS

OBD Adapter: OBD Adapter

Multiecuscan License: Multiecuscan License

Multiecuscan (Download): Multiecuscan

DISCLAIMER: Purchasing this switch for means other than direct replacement implies you will be altering the configuration via the 3rd party instructions above in order to activate Race mode. Please be aware that this is not a function or procedure supported or instructed by EUROCOMPULSION, and that by altering this configuration for purposes other than originally intended by the factory, you do so (and accept possible fitment issues, possible decrease in performance or mode functionality, and/or troubleshooting) at your own risk.

NOTE: There are two variants of these: Most 2017-2019 variants normally utilize a 10 pin configuration, while most 2020+ variants utilize a 4 pin switch.